Greywater Systems for Residential and Commercial Use

The Aqua2use Greywater System can recycle water coming from the washing machine, shower, bath, or bathroom sink. You don’t have to connect all the fixtures in your home to the Aqua2use to start saving water. By only connecting your washer, you can recycle 25 gallons of water with each load. Each time you take a shower or do a load of laundry, you reuse water for irrigation. With the Aqua2use Greywater System, an average family of four can save up to 40,000 gallons of water a year.

After using your washing machine, shower, or bathroom sink, the water travels from your water pipes into the Greywater System through an inlet on the side of the unit, then the water moves through several layers of filtration. When the tank is full of greywater, the pump is activated which diverts the water through an outlet, and finally, leads the water to your outdoor irrigation system. You can safely use standard 1/4 inch drip tubing to disperse the greywater into your landscape or garden. At the heart of the Greywater System are the progressive Matala filters. The Aqua2use contains six layers of Matala filtration to intercept all lint, hair, and impurities. Maintenance of the Aqua2use Greywater System is simple, every four to six months, depending on how much greywater you use, you will simply need to hose down the filters and replace them in the unit.

Inside of the Aqua2use Greywater System, there is a built in 3-way diverter valve which allows you to send greywater to the Aqua2use unit or divert the water back to the sewer. The outlet which drains greywater back to the sewer is also connected to the overflow basket in the Aqua2use Greywater System. If too much water is coming to the unit, then the greywater will automatically flow back to the sewer. The pump will only run when the tank is full, or when activated by a controller after 24 hours if the tank is not completely full. If you do not want to use the pump, the Aqua2use can also be used as a Gravity System.