Greywater Pump Replacement for the Aqua2use GWDD
Greywater Pump Replacement for the Aqua2use GWDD
High-Performance Submersible Pump for Effortless Water Reuse
Dealing with a failing greywater pump? Restore your system in minutes with this direct replacement for the Aqua2use GWDD. Designed for quick, hassle-free installation, simply swap out your old submersible pump, secure the new one, and get back to living green with your greywater diversion system—no service call required!
✔️ Easy Replacement – No Service Necessary
✔️ Works with Aqua2use GWDD
✔️ Swap in Under 5 Minutes – No Plumbing Adjustments Required
✔️ Get back to saving water, and reducing utility bills
Couldn't load pickup availability
-
Pump Specifications:
- Watts: 200
- Outlet: 32mm
- Rated head: 5m
- Rated flow: 53 LPM
- Max head: 7m
- Max flow: 136 LPM
- Max Watt/Amp: 240W / 2.5A
- Rate Watt/Amp: 200W / 1.7A
- Volt/Hz: 115V / 60Hz
- Max. Head: 23 ft
- Discharge: 1-1/4 inch
- Max. Flow: 1920 GPH
-
When your pump fails, your entire greywater system grinds to a halt—and that means:
❌ Backups & Overflows – Water not diverting properly, leading to pooling and drainage issues.
❌ Inconsistent Flow – Weak or intermittent water pressure, causing uneven irrigation.
❌ Increased Water Waste – If your system isn’t working, you’re back to wasting water and money.
❌ Expensive Repairs – Hiring a technician or replacing the entire system costs hundreds more than just swapping the pump.
The Fastest Fix? A 5-Minute Pump Swap.
1: Turn off the power and disconnect the old pump.
2: Connect the new pump using the existing fittings.
3: Power it on and test for proper operation.
This high-performance replacement pump is built specifically for Aqua2use GWDD systems, ensuring perfect fitment and long-term reliability—so you can get back to saving water, without the hassle.
A Pump Designed for the Leading Greywater Diversion Device
-
Smarter Sensing, Better Water Flow
Unlike systems with just one float, this pump uses two magnetic micro floats to sense water levels. These floats activate the control box, which makes sure the tank fills completely before pumping. This allows for full water flow that fills your drip tube and reaches the end of the line. It also helps the pump avoid turning on and off too often and ensures that the entire surface of the filters is used, keeping them working better for longer.
-
Less Leftover Water, No Manual Work
The control box can turn the pump on by itself—not just when the floats are triggered. This helps remove as much water as possible from the tank, leaving very little behind.
-
Fully Automated for Easy Operation
Some systems need an external timer to run the pump every 24 hours. The Aqua2use system doesn't need that. Its control box automatically checks for any leftover water and runs the pump as needed—no extra timers required.
Reliable Performance for Greywater Systems
The Aqua2use GWDD pump delivers strong performance with a maximum head of 22 feet and a flow rate of up to 35 gallons per minute (GPM).
The chart shows a smooth performance curve, ensuring consistent water pressure for efficient greywater distribution. Designed for reliability and efficiency, this pump is perfect for irrigation and filtration systems.
Easy Installation & Smart Safety Features
-
Easy Installation with Standard Connections
This pump is designed for simple installation, with compatibility for 1-1/2" check valves, swing check valve unions, and auto-fill valves. The pump outlet connects seamlessly to diverter valves, backwater valves, and bathtub drains, ensuring an effortless setup process.
-
Built-In Dry Run Protection & Overflow Safety
A dry-run pump protection system prevents damage if the incoming greywater runs low. With an inbuilt overflow mechanism, this pump keeps water moving efficiently, making it an ideal solution for subsurface dripper irrigation, bathrooms, and commercial greywater treatment systems.
-
Perfect for Drip Irrigation & Garden Use
Designed for drip irrigation applications, this pump maintains a steady flow of water for subsurface dripper irrigation systems. It pairs seamlessly with dimensional screen filters, 3rd filter setups, and rubber drain screens, making it a perfect solution for residential and small-scale, low-tech solutions.
Sustainable, Cost-Effective Water Reuse
-
Efficient Wastewater Reuse for Any Application
This affordable waste water pump helps reuse water from in bathrooms, laundry trays, and complete bathroom. It works seamlessly with built-in pump basins and storage tanks, making it perfect for residential and commercial wastewater management.
-
Perfect for Drip Irrigation & Garden Use
Designed for drip irrigation applications, this pump maintains a steady flow of water for subsurface dripper irrigation systems. It pairs seamlessly with dimensional screen filters, 3rd filter setups, and rubber drain screens, making it a perfect solution for residential and small-scale, low-tech solutions.
-
Join the Greywater Movement & Save Water Daily
Forward-thinking homeowners and commercial buildings are turning to efficient greywater diversion to lower costs and promote sustainable water reuse. Upgrade to a better pump solution today and start reusing greywater for irrigation, filtration, and beyond.
Frequently Asked Questions
How do I know if this pump will fit my greywater system?
This pump is designed specifically for Aqua2use GWDD systems and other compatible greywater diversion setups. If you’re unsure, check your existing pump’s specifications or contact us for support.
How long does this pump last?
With proper maintenance, this pump can last for years thanks to its corrosion-resistant design and high-efficiency motor.
What’s included in the purchase?
You’ll receive the pump unit, necessary fittings, and an installation guide to make setup quick and easy.
Why don't you use a low voltage pump?
Low voltage pumps have a limited service life and generally won’t do the hours required expected in this type of installation.
Who can service the pump?
The pump can be serviced by the plumber that installed your unit.
What is the warranty?
All parts and the pump are covered by a 12 month replacement warranty.
Do I have to use a pump in this system?
If you have enough fall on your site this unit will work without a pump.
The Aqua2use® GWDD is registered as a gravity greywater device.
Generally speaking you will need a minimum of 2 metres (6.6 feet) in height to effectively operate the G Drip tube. So designing the system correctly to operate on gravity is critical.
How often do I have to replace or clean the filters?
The recommended cleaning cycle is from 4-6 months, depending on how many people are using the system. Dispose of waste thoughtfully and wear protective gloves when cleaning.